Fuel Injector cleaning is an all to often and very neglected part of maintenance. Not taking care of your fuel system can cause fuel injectors to become dirty, gummed up and  clogged.

Fuel injector cleaning a before and after

More important is that we do the same for the inside of the fuel injector.

Even though injectors have the finest tolerances of any working part in the modern internal combustion engine regular cleaning as a maintenance item is hardly ever considered or advised.

Add engine gunk too the hydrocarbons, additives and moisture drawing Ethanol that forms part of today’s fuels  and you have the root cause for fuel injectors to become restricted and clogged. Something all fuel injected gasoline based engines are vulnerable too.  Marine applications and vehicles that sat for a long time with fuel in the tank as well as older vehicles in general are the most vulnerable and most likely to experience drive-ability and emissions problems. Ultrasonic  cleaning is the most reliable and only cleaning method  that can truly guarantee that injectors coming of these engines are clean.

Almost all of today’s computer controlled engines monitor one or two oxygen sensors, placed in such a way that it can only analyze the combined exhaust gases and not each cylinder, thus averaging the air fuel ratios.  Ad a dirty, gummed up or clogged injector in the mix and this can cause some cylinders to run leaner and other cylinders to run richer, causing all kinds of drive-ability issues. Eventually it might and can cause catastrophic engine failure. Injector cleaning can prevent this from happening.

allow us to earn your business. please click here for shipping instructions or call us today 1.800.381.2065!

 We can help clean your injectors and save you money, too! We service injectors for people nationwide!

 Injector Cleaner!

Fuel Injector Cleaner can only clean what it touchesInjector cleaner or cleaning additives  can only clean what it touches! Liquid in its natural state or under pressure will always follow the easiest path. It therefore becomes clear why some cleaning methods such as injector cleaning additives or fuel rail induced cleaners does not always do a good job of cleaning the internal components of the fuel injectors.

Chemical cleaners poured in the tank cannot distinguish between the various components it touches and therefore will have a cleaning effect on everything it comes in contact with. In theory this is supposed to be good but in practice this more often than not has the opposite effect. Grime and dirt loosened by the cleaner from the various fuel system components such as the fuel tank, fuel lines and fuel rail are sent directly to the injectors. Since the filter baskets inside the injectors are very small in micron size they become clogged very quickly. In some cases fuel rail induced injector cleaner will damage the filter baskets and allow for larger pieces of debris to enter the injector. This can cause the pintle to become stuck or if the debris lodges itself on the pintle, ball or disc seat the injector will start to leak. Leaking injectors is not only a fire hazard but can also cause engine damage.

Some  injector cleaners might even be harmful to expensive components such as catalytic converters, oxygen sensors and other components.

Other than it “feels” if the engine runs better there is just no way to verify or confirm that the money spent on these cleaners was worth it because visual inspection of the spray patterns and flow rates are not possible.

Need  injector cleaning, We do it the right way guaranteed! We will return your injectors within 24 hrs after we received them.

click here for shipping instructions and get started today!

Or call us today at 1.800.381.2065 for more information. We can help clean your fuel injectors and save you money, too! We service fuel injectors for people nationwide!

Injector Cleaning by removing them from the engine

Cleaning injectors by removing them from the engine and then proceed with a process of visual inspection, ultrasonic cleaning and actual flow testing for spray patterns and volume is the only accurate, reliable and guaranteed way to confirm  that they are clean and doing their job the way they are intended to . Anything ells is only guess work.

What you see when  cleaning injectors on the engine ABSOLUTELY NOTHING!

What you see when injector cleaning is done inside the engine

  • Atomization cannot be determined.
  • Spray pattern and distribution cannot be determined.
  • Damaged pintle caps, bad, cracked or torn O-rings.
  • It cannot determined leaking pintle, disc or ball valves.
  • It cannot check  fuel delivery per pulsed cycle set.
  • Cannot confirm equal fuel delivery for the injector set is .
What you can see when injector cleaning and flow testing is done outside of the engine:

Bad fuel injector spray pattern

Spray Pattern (Distribution) and Atomization:

Fuel Injector distribution and atomization

Cleaning and testing equipment.

Fuel Injector testing machineManufacturer approved state of the art equipment allows us to visually check injectors for leaks, distribution, faulty spray patterns and confirm  flow rates. To further strengthen our proven diagnostic procedures, and to confirm proper injector functionality at all levels of operation, we check the injectors electronically for current draw and pulse them from 250 to at least 10 000 rpm and sometimes as high as 20 000 rpm before final flow testing. Our cleaning equipment also allows us to compare, side by side, for flow rates and spray patterns.

We service automotive, motorcycle, ATV, snowmobile, jet ski,  marine, and outboard fuel injectors. We also service GDI or direct injectors (Gasoline Direct Injectors). Our cost effective ultrasonic cleaning and electronic flow testing procedures will restore most fuel injectors to a reliable factory new condition, therefore eliminating the purchase of new and expensive OEM or aftermarket fuel injectors.

When all cylinders are operating evenly, you can expect emissions, drive-ability, peak performance and fuel economy to improve.

Spray pattern before ultrasonic fuel injector cleaning.

dirty fuel injector Flow testing injectors

Spray pattern and volume  after cleaning.

A cleaned injector after going through our fuel Injector Cleaning process After ultrasonic cleaning

 

We also offer “Same Day” or “While You Wait”  cleaning service at $25.00 per injector and $35.00 per Direct Injector.

Shipping Instructions:

For fast, friendly and reliable injector cleaning service, lets us help you clean your injectors the right and only guaranteed way.

click here and get started today!

Or call us today at 1.800.381.2065 for more information. We can help clean your fuel injectors and save you money, too! We service fuel injectors for people nationwide!

 

We Do Not Service:

  • Diesel Injectors
  • GM Vortec CPI injector “spider” assemblies.
  • Ficht Injectors